This watch has a manually wound spring drive.
You can wind the crown to wind the
mainspring to drive the watch.
How to manually wind the mainspring
-
Turn the crown at the normal position clockwise (12 o’clock direction) slowly.
-
Wind the mainspring until the power reserve indicator shows a fully wound state.
-
Make sure that the seconds hand is moving.
If the crown is turned counterclockwise (the 6 o’clock direction), the mainspring of the watch will not be wound.
CAUTION
The crown cannot be turned further when the mainspring is fully wound to prevent overwinding of the mainspring. Do not try to forcefully turn the crown as this may damage the watch.